The MER Parts Professionals
Gary, Norm, Brian and Herby Have A Combined Parts Supply Experience Of 70 Years.
They Know The Iron And The Logistics Involved With Getting You The Right Stuff-Quick! Give Gary a call @ 206-286-1817.
For things like…
Deere Engine Rebuild Kits-
Transmission Drive Plates-
Engine Mounts-
Cowl and EM Exhaust Silencers-
Exhaust Flexes and Flanges-
Engine and Transmission Controls-
Filters-
Click On The Link Below For The Detailed Surplus Equipment Brochure:
https://rs6.eporia.com/company_122//mer%20specials%20101609.pdf
Specials and SURPLUS MER EQUIPMENT:
New Power-Gard Gens., 8 and 10kW, 6.5 kW Loadstar Diesel Generator, Stamford 165kW Generator End, Hydraulic Driven Motor Starting 25kW Generator, Used Kato 40kW Generator End, New Yanmar TNV98 Turbocharged Engines, 54HP Perkins 3.103 Diesel Engine W/trans, Isuzu DA-120, Twin-Disc 5111, 1.74:1 Ratio, Arneson Drive, Arneson Drive Propellers, Power-take-off Clutches Twin-Disc, SAE 4, Borg and Beck SAE 1, Twin-Disc SAE 3, Side-mount Accessory Drive For Deere 4045-6068, Water Cooled Exhaust Elbows To Fit Many Marine Diesels With The 4 ¼” Turbo Outlet Flange, Used Isuzu Engine Parts-DA-120, C240, 4-6BD1-Oil Pans, Crankshafts, Camshafts, Crankshaft pulleys, Oil Pumps, Water Pump Cores, New Raw Water Pumps, Enclosure For 12kW Generator Set, Single Axle Trailer, Double Axle Trailer, Used Aluminized Steel Mufflers, New Valve Covers- Deere 4024 Diesel, Yanmar/Mercruise Exhaust Adapter, Heat Exchangers, Deere 6081 & 6125, Isuzu ETO Electrical Timers, HD Relays Suitable For Powering Stereos and Driving Lights.
MERPOWER Technical Support 800-777-0714 
hello
can i use the heat exchanger off the 6125 on my 4045
thank andy
Hi Andy,
Yes, it will work. However, the 6125 unit is much larger than you need.
If you will call me I will find something that fits your cooling system better.
Thankyou,
Ben
206-286-1817
Hey Norm & Co. Thanks for putting faces to your voices. I am looking for spare heat exchangers for my isusu c240 with borg warner transmission. Can you help me out? I prefer ones with pencil zincs to reduce the electrolisis.
Barry