MER Mounts Save Time and Dollars!

14 08 2009

Figure 1  The Final Welded Mount Foot Fits Perfectly

Figure 1 The Final Welded Mount Foot Fits Perfectly

 Call Gary, Norm, or Brian at 800-777-0714 To Order Yours

Weld-up mounting feet are available from MER to
make engine, transmission, and generator mounting
much faster and easier.
The finished product, seen below, works with your
existing mount holes on the engine block or
transmission, to properly place the slotted plate, and
provide a place for the adjustable mount to fit beneath.

Figure 2   The Vertical Plate Can Be Turned Over If Need For Your Aplication

Figure 2 The Vertical Plate Can Be Turned Over If Need For Your Aplication

 

 To get to this point, suspend your engine,
transmission, or generator from a hoist or block  it safely in the position needed.

Next lay out the MER pieces as shown, and be sure to leave .5″ of threads below the slotted plate, to allow for later adjustment of the mount itself. Tack weld them, and do a careful trial fit, making any needed adjustments before the final welding.

Figure 3   Be Sure to Leave 1/2" of Adjustment Below the Slotted Plate For Later Adjustment

Figure 3 Be Sure to Leave 1/2" of Adjustment Below the Slotted Plate For Later Adjustment

Advertisements